Hastelloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good fabricability. The alloy has resisted both general and localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.
Chemical Composition | 57Ni-16Mo-16Cr-5Fe-4W-2.5Co-1Mn-0.35V-0.08Si-0.01C |
Physical Property |
• Density: 8.89 g/cm³
• Tensile strength: 790 MPa • Yield strength: 355 MPa • Melting Point: 1370 ℃ • Elongation: 40% |
Stock & Dimensions |
Our warehouse has a large number of stock to provide you with a variety of products in different sizes,
and can also customize the size according to your needs. • Bar: 0.5~600mm Diameter • Coil: 0.5~150mm Thick • Plate: 0.5~200mm Thick • Pipe: 6~630mm External Diameter; 0.5~40mm Wall Tick • Available in specific sizes |
Product Forms |
We provide you with a variety of product forms, including but not limited to: • Bar/Rod • Pipe/Tube • Coil/Strip • Plate/Sheet/Circle • Wire • Fitting (Flange, Elbow, Tee...) • Customize |
Essential details
Hastelloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good fabricability. The alloy should be considered for use in environments where resistance to hot contaminated mineral acids, organic and inorganic chloride-contaminated media, chlorine, formic and acetic acids, acetic , acetic anhydride, sea water and brine solutions is desired.
Hastelloy C-276 has resisted the formation of grain boundary precipitates in the weld heat-affected zone, making it a candidate for most chemical and petrochemical processing applications in the as-welded condition. The alloy has resisted both general and localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.
Hastelloy C-276 is readily fabricated by welding, using methods similar to those utilized for nickel-based alloys.